Take the opportunity to do the ancillary work during the renovation of the roof

Add an underlying screen. The HPV (Highly Permeable to Water Steam) underlayment screen helps to waterproof your roof with air and water while allowing water vapour to escape. It reduces pressure-depression phenomena of the roof, responsible for the flight of tiles during storms which enables the installation of pipes on lower slopes. It finally avoids the penetration of powdery snow, dust, pollen. How to choose the screen? Everything depends on the frame, the spacing of the rafters, the type of coverage, but also the presence or not of attics. For more accurate information call your Toronto Roofing Contractor experts today. Only a professional can judge the feasibility of the operation.

Home Renovation

Install roof windows.

Quality roof windows with excellent thermal and sound performance provide considerable solar energy in converted attics. Peripheral connections must be perfectly executed to ensure reliable sealing and thermal insulation. Today there are models suitable for classified buildings, metal or wood. It can be installed the flat roof or sloping, regardless of its size. It offers excellent thermal and sound insulation. The professional must check if all the requirements for the installation are met. The abundant rains will feed the plants, so the watering system is less complicated. Providing a high-performance waterproofing will be necessary. The attic, them, must have adequate and adjustable ventilation to avoid condensation. Choose a system whose plants are mostly mature when laying.

Install photovoltaic tiles

More aesthetic but more expensive than large panels, the photovoltaic tiles adapt well to slate or terracotta roofs. The watertightness of the roof must be guaranteed and provide proper ventilation of the roof because the panels generate a real overheating, too often neglected. This overheating is also detrimental to the performance of the photovoltaic panel. For a zinc cover, the integrated panels are specific because the contact between different metals causes accelerated oxidation. It is better to go to zinc fitter and opt for products that have received a professional opinion.

Real or false slates for a roof renovation

Natural slate, made from shale rock has an almost unlimited lifespan but is quite expensive. Slate fibre cement is often used at a lower cost but watch out for the risk of fading over time. Terracotta products dyed in the mass can also merge durably with slate but without reaching its finesse. It is therefore essential to choose taking into account the price of the project, its appearance and its durability.

Conclusion: best in class quality

Opt for a quality product and thick enough because it is made to last. Once installed, the screen is exposed to the risk of ageing, firstly because of UV rays (before the laying of the cover), then hot weather under the cap in summer (they can exceed 80 degrees C). Some membranes have a metallised surface and therefore reject some of the heat in the summer while reducing winter energy losses and allowing water vapour to escape.

Better Details for the Perfect Gutter Repair from the Best Company

It is always possible to quickly repair a small gutter leak. But often, this only delays the appearance of larger damage. So, at the same time as you make the repair, do a general inspection. And maybe consider a future full replacement!

For all types of gutters

  • With a self-adhesive bituminous strip
  • These cold self-adhesive tapes are sold in rolls of 5 or 10 m.
  • Sand the area to be repaired with fine sandpaper to clean it, and then dust off.
  • In the cutter, cut a strip of bitumen so that it extends well beyond the area to be repaired.
  • Remove the protective paper and apply the tape by pressing well and avoiding creases.

Tip: The band is well suited for large holes, weakened areas of metal gutters. It is more effective and aesthetic if it is placed inside the gutter; but it is also possible to stick it outside.

  • With a self-adhesive bituminous strip
  • With a bituminous spray
  • Shake the aerosol for a long time. Spray the area to be repaired at a distance of about 20 cm.

Gutter Repair Toronto

Be careful not to create extra thickness. To do this, start moving the aerosol before pressing the button. Proceed in two passes and in short sprays. You can get the tips from the Gutter repair Toronto services now.

Good to know: The spray is convenient for cracks, pitted or corroded areas. Thoroughly clean the nozzle after use. You will get the same result with liquid sealants, similar to paints, applied to the brush.

With putty

  • Any elastomeric cartridge sealant can do the job, with a preference for single-component polyurethane products.
  • Clean the area to be repaired. Dry perfectly.
  • Apply the sealant as for a joint. Smooth on the wet finger.

Tip: The sealant is more suitable for repairs on PVC but is also suitable for metal. Be careful not to disturb the flow of water.

With putty

  • 2 For welded gutters
  • With an iron
  • A metal gutter on zinc or steel can be repaired by a tin solder.
  • Heat the area to be welded. Approach the tin wire. Be generous. Spread with the tip of the tip overflowing wide).

It is necessary first to clean the place of the welding then to strip with hydrochloric acid if a recent zinc is used a cleaner less strong with the help of a brush. When the tip is hot enough, pour the tin bolt by pressing hard on the weld.

Tip: Welding repair is only possible if there is enough metal remaining. Corrosion often turns the gutter into lace. The solution is then to replace the part concerned. Or the entire gutter.

The leaves stop is placed on all of your gutters and, as its name suggests, can block deposits of leaves that could block the flow of your installation. The advantage of this accessory is that it is very easy to install since it is a mesh (which fits the size of your gutter) to clip on the top of the gutter.